Hawk-Seal-E
is
easily applied with anything from a
distributor truck to a simple,
trailer mounted system. Spray bars
or hand-held nozzles are fine.
This
is a rapid procedure, traffic
diversions are minimal and
expensive lane closures may not be
necessary.
Click
Here
For
Contact
Information
|
| Application
of Hawk-Seal-E Hawk-Seal-E
is diluted with water (no
sand is used).
We
strongly advise that signs or
personnel warn motorists to drive
no more than 7 MPH if the surface
is wet. |
|
A
minimum of three applications is made.
To ensure
that Each application is allowed to
penetrate and dry before the next
application.
Traffic
has been known to follow directly
behind the application equipment.
Usually
within 15-45 minutes traffic can resume
normal speed. |
